Result of 30 kpa to psi is approximately 4.36 psi.
To convert from kilopascals (kpa) to pounds per square inch (psi), you multiply the kpa value by 0.1450377. This conversion factor comes from the relationship between the two units, since 1 psi equals exactly 6.89476 kpa. So, multiplying 30 kpa by 0.1450377 gives the psi equivalent.
Conversion Result
30 kpa is equal to about 4.36 psi.
Conversion Tool
Result in psi:
Conversion Formula
The formula to convert kilopascals (kpa) to pounds per square inch (psi) multiplies the kpa value by 0.1450377. This works because 1 psi equals 6.89476 kpa, so dividing 1 by 6.89476 gives the conversion factor. For example, 30 kpa multiplied by 0.1450377 equals approximately 4.36 psi.
Conversion Example
- Convert 50 kpa to psi:
- Step 1: Take the value, 50 kpa.
- Step 2: Multiply 50 by 0.1450377.
- Step 3: 50 * 0.1450377 = 7.251885 psi.
- Therefore, 50 kpa equals about 7.25 psi.
Conversion Chart
| kpa | psi |
|---|---|
| 5.0 | 0.7252 |
| 10.0 | 1.4504 |
| 15.0 | 2.1756 |
| 20.0 | 2.9008 |
| 25.0 | 3.6260 |
| 30.0 | 4.3551 |
| 35.0 | 5.0803 |
| 40.0 | 5.8055 |
| 45.0 | 6.5307 |
| 50.0 | 7.2559 |
| 55.0 | 7.9811 |
Use this chart to quickly find psi equivalents for kpa values from 5 to 55. Just find your kpa value on the left and see the corresponding psi on the right.
Related Conversion Questions
- How many psi are in 30 kilopascals?
- What is the psi equivalent of 30 kpa?
- Can you convert 30 kpa to pounds per square inch?
- How do I change 30 kpa into psi units?
- What is the pressure in psi for 30 kilopascals?
- Is 30 kpa equal to about 4.36 psi?
- How do I calculate psi from 30 kpa manually?
Conversion Definitions
kpa
Kilopascal (kpa) is a metric pressure unit equal to 1,000 pascals, used to measure force per area in the metric system. It is common in engineering and meteorology for expressing pressures like weather systems or mechanical stresses.
psi
Pounds per square inch (psi) is an imperial pressure unit representing force in pounds applied over one square inch area, used primarily in the United States for tire pressures, hydraulic systems, and other pressure measurements.
Conversion FAQs
How accurate is converting 30 kpa to psi?
The conversion from 30 kpa to psi using the factor 0.1450377 is precise to four decimal places, making it suitable for most practical purposes. Minor differences might occur with rounding, but overall, the calculation is reliable.
Can I convert kpa to psi without a calculator?
Yes, approximate conversions can be done by multiplying kpa by about 0.145, but for exact results, using a calculator or digital tool is recommended. For 30 kpa, 4.36 psi is a close estimate without detailed calculation.
Why is the conversion factor 0.1450377?
This factor is derived from the exact equivalence where 1 psi equals 6.89476 kpa. Dividing 1 by 6.89476 yields 0.1450377, which is used to convert kpa to psi accurately.
What is the reverse conversion from psi to kpa?
To convert psi back to kpa, multiply the psi value by 6.89476. For example, 4.36 psi multiplied by 6.89476 gives approximately 30 kpa.
Last Updated : 22 July, 2025
I’ve put so much effort writing this blog post to provide value to you. It’ll be very helpful for me, if you consider sharing it on social media or with your friends/family. SHARING IS ♥️
Sandeep Bhandari holds a Bachelor of Engineering in Computers from Thapar University (2006). He has 20 years of experience in the technology field. He has a keen interest in various technical fields, including database systems, computer networks, and programming. You can read more about him on his bio page.