The engine size of 454 cubic inches converts to approximately 7.448 liters.
This conversion is based on the volume measurement where 1 cubic inch equals 0.016387 liters. By multiplying the engine’s cubic inch displacement by this factor, you get the equivalent volume in liters.
Conversion Tool
Result in liters:
Conversion Formula
The conversion formula from engine displacement in cubic inches to liters is:
Liters = Engine (cubic inches) × 0.016387
This formula works because 1 cubic inch equals exactly 0.016387 liters. When you multiply the engine size in cubic inches by this number, you get the volume in liters. This is useful when comparing engine sizes that are expressed differently.
Example: Convert 454 cubic inches to liters
- Step 1: Identify the conversion factor: 0.016387 liters per cubic inch.
- Step 2: Multiply 454 by 0.016387: 454 × 0.016387 = 7.448
- Step 3: Result is approximately 7.448 liters.
Conversion Example
- Convert 350 engine to liters:
- Multiply 350 by 0.016387 = 5.735 liters.
- 350 × 0.016387 = 5.735
- So, 350 cubic inches equals 5.735 liters.
- Convert 500 engine to liters:
- 500 × 0.016387 = 8.1935 liters.
- Multiply the engine size with conversion factor.
- Result: 8.1935 liters.
- Convert 400 engine to liters:
- 400 × 0.016387 = 6.5548 liters.
- This is the engine volume in liters.
- Convert 429 engine to liters:
- 429 × 0.016387 = 7.028 liters.
- Multiply to get the equivalent liters.
Conversion Chart
The chart below shows engine sizes from 429.0 to 479.0 cubic inches and their equivalent in liters. You can use this table to quickly find the liter value for a given engine size without calculation.
| Engine (cubic inches) | Liters |
|---|---|
| 429.0 | 7.028 |
| 435.0 | 7.125 |
| 440.0 | 7.207 |
| 445.0 | 7.29 |
| 450.0 | 7.377 |
| 455.0 | 7.463 |
| 460.0 | 7.55 |
| 465.0 | 7.636 |
| 470.0 | 7.722 |
| 475.0 | 7.808 |
| 479.0 | 7.875 |
Related Conversion Questions
- How many liters is a 454 cubic inch engine equivalent to?
- What is the liter displacement of a 454 engine?
- Convert 454 engine size to liters — what’s the value?
- How to translate 454 engine cubic inches into liters?
- What liters equal a 454 ci engine?
- Is 454 engine larger than 7 liters?
- What’s the formula to convert 454 cubic inches to liters?
Conversion Definitions
Engine: An engine is a mechanical device that converts energy into mechanical motion. In automotive contexts, engine size is measured by the total volume of all cylinders inside, commonly expressed in cubic inches or liters, which indicates its capacity to draw in air and fuel.
Liters: A liter is a metric unit of volume equal to 1,000 cubic centimeters or 1 cubic decimeter. It is used to measure liquid or gas volumes, and in automotive terms, it quantifies the engine’s cylinder displacement, showing the total volume inside the engine’s combustion chambers.
Conversion FAQs
Why use liters instead of cubic inches for engine size?
Liters provide a metric measurement that is globally recognized and easier to compare across different regions. Cubic inches is mainly used in the United States. Liters simplify conversions with metric units used for fuel and emissions specifications.
Can I convert liters back to cubic inches?
Yes, by dividing liters by 0.016387, you get cubic inches. The conversion is reversible using the inverse of the multiplier, allowing users to switch between these units as needed.
Does engine displacement in liters affect performance?
Engine displacement gives an idea of the engine’s capacity, which influences power and torque. Higher displacement often means more power, but other factors like design, aspiration, and tuning affect performance beyond just size.
Are all engines measured the same way in liters?
Mostly, engine displacement in liters counts the total swept volume of all cylinders. However, some manufacturers might report slightly different values depending on rounding or measurement standards.
Is there any difference between engine displacement and engine capacity?
The terms are interchangeable; both refer to the total volume inside the engine cylinders where combustion occurs. It indicates how much air-fuel mixture the engine can draw for combustion.
Last Updated : 17 July, 2025
I’ve put so much effort writing this blog post to provide value to you. It’ll be very helpful for me, if you consider sharing it on social media or with your friends/family. SHARING IS ♥️
Sandeep Bhandari holds a Bachelor of Engineering in Computers from Thapar University (2006). He has 20 years of experience in the technology field. He has a keen interest in various technical fields, including database systems, computer networks, and programming. You can read more about him on his bio page.