1 mbar is approximately equal to 0.02953 inhg.
To convert millibar (mbar) to inches of mercury (inhg), you multiply the value in mbar by the conversion factor 0.02953, which represents how many inches of mercury fit into one millibar of pressure.
Conversion Tool
Result in inhg:
Conversion Formula
The formula to convert mbar to inhg is:
inhg = mbar × 0.02953
This multiplication works because 1 inch of mercury equals 33.8639 millibars. Therefore, 1 millibar is 1/33.8639 inches of mercury, which is approximately 0.02953. Multiplying any millibar value by this factor gives the equivalent pressure in inches of mercury.
Example calculation for 1 mbar:
- Start with 1 mbar
- Multiply by 0.02953 (conversion factor)
- 1 × 0.02953 = 0.02953 inhg
Conversion Example
- 10 mbar to inhg:
- Multiply 10 by 0.02953
- 10 × 0.02953 = 0.2953 inhg
- 50 mbar to inhg:
- 50 × 0.02953 = 1.4765 inhg
- 100 mbar to inhg:
- 100 × 0.02953 = 2.953 inhg
- 0.5 mbar to inhg:
- 0.5 × 0.02953 = 0.01477 inhg
- -20 mbar to inhg:
- -20 × 0.02953 = -0.5906 inhg
Conversion Chart
The table below shows values from -24.0 mbar to 26.0 mbar converted to inches of mercury. You can find the corresponding inhg value by multiplying the mbar value by 0.02953. Use this chart to quickly estimate pressure conversions without performing calculations.
| mbar | inhg | mbar | inhg | mbar | inhg |
|---|---|---|---|---|---|
| -24.0 | -0.7087 | 0.0 | 0.0000 | 24.0 | 0.7087 |
| -20.0 | -0.5906 | 4.0 | 0.1181 | 26.0 | 0.7678 |
| -16.0 | -0.4725 | 8.0 | 0.2362 | ||
| -12.0 | -0.3544 | 12.0 | 0.3544 | ||
| -8.0 | -0.2362 | 16.0 | 0.4725 | ||
| -4.0 | -0.1181 | 20.0 | 0.5906 |
Related Conversion Questions
- How many inches of mercury equal 1 millibar?
- What is the pressure in inhg if I have 1 mbar?
- How do I convert 1 mbar into inches of mercury manually?
- Is 1 mbar more or less than 1 inhg?
- What formula do I use to change mbar to inhg starting at 1 mbar?
- Can 1 millibar be expressed as inches of mercury?
- Why does 1 mbar equal about 0.02953 inhg?
Conversion Definitions
mbar (millibar): A unit of pressure equal to one-thousandth of a bar, which measures atmospheric and other pressures. It is commonly used in meteorology for weather reports, where normal atmospheric pressure is around 1013 mbar. Millibar quantifies force exerted over an area.
inhg (inches of mercury): A pressure measurement unit based on the height of a mercury column in inches. It originated from mercury barometers, where atmospheric pressure supports a mercury column. One inhg is equivalent to 33.8639 millibars, used in aviation and weather forecasting.
Conversion FAQs
Does the temperature affect the conversion from mbar to inhg?
The conversion factor between mbar and inhg is a fixed ratio based on the physical properties of mercury and pressure units. Temperature changes can affect mercury’s density slightly, but the standard conversion assumes a constant temperature, so variations are usually negligible in typical use.
Why are negative mbar values converted to negative inhg?
Negative pressure values in mbar indicate pressures below a reference point such as atmospheric pressure. When converted to inhg, the negative sign remains, representing vacuum or pressures lower than standard atmospheric, useful in certain scientific and engineering contexts.
Can I use the conversion tool for decimal or fractional mbar values?
Yes, the tool supports decimal inputs since the input field accepts numbers. It calculates precise inhg values by applying the conversion factor to any decimal or fractional mbar value entered, providing results with four decimal places accuracy.
Is the conversion factor the same for all pressure ranges?
The factor 0.02953 is constant across all pressure ranges because it is derived from unit definitions. However, for extremely high pressures or very precise scientific measurements, other factors like temperature and gravity variations might be considered separately.
How precise is the conversion from mbar to inhg?
The conversion to four decimal places offers good precision for most applications like weather forecasting or aviation. However, for laboratory calibrations or scientific experiments, more precise instruments and correction factors might be required beyond this basic conversion.
Last Updated : 22 July, 2025
I’ve put so much effort writing this blog post to provide value to you. It’ll be very helpful for me, if you consider sharing it on social media or with your friends/family. SHARING IS ♥️
Sandeep Bhandari holds a Bachelor of Engineering in Computers from Thapar University (2006). He has 20 years of experience in the technology field. He has a keen interest in various technical fields, including database systems, computer networks, and programming. You can read more about him on his bio page.